Ceph

Ceph Object Store CRD

Rook allows creation and customization of object stores through the custom resource definitions (CRDs). The following settings are available for Ceph object stores.

Sample

Erasure Coded

Erasure coded pools can only be used with dataPools. The metadataPool must use a replicated pool.

NOTE: This sample requires at least 3 bluestore OSDs, with each OSD located on a different node.

The OSDs must be located on different nodes, because the failureDomain is set to host and the erasureCoded chunk settings require at least 3 different OSDs (2 dataChunks + 1 codingChunks).

apiVersion: ceph.rook.io/v1
kind: CephObjectStore
metadata:
  name: my-store
  namespace: rook-ceph
spec:
  metadataPool:
    failureDomain: host
    replicated:
      size: 3
  dataPool:
    failureDomain: host
    erasureCoded:
      dataChunks: 2
      codingChunks: 1
  preservePoolsOnDelete: true
  gateway:
    # sslCertificateRef:
    # caBundleRef:
    port: 80
    # securePort: 443
    instances: 1
    # A key/value list of annotations
    annotations:
    #  key: value
    placement:
    #  nodeAffinity:
    #    requiredDuringSchedulingIgnoredDuringExecution:
    #      nodeSelectorTerms:
    #      - matchExpressions:
    #        - key: role
    #          operator: In
    #          values:
    #          - rgw-node
    #  tolerations:
    #  - key: rgw-node
    #    operator: Exists
    #  podAffinity:
    #  podAntiAffinity:
    #  topologySpreadConstraints:
    resources:
    #  limits:
    #    cpu: "500m"
    #    memory: "1024Mi"
    #  requests:
    #    cpu: "500m"
    #    memory: "1024Mi"
  #zone:
    #name: zone-a

Object Store Settings

Metadata

name: The name of the object store to create, which will be reflected in the pool and other resource names.
namespace: The namespace of the Rook cluster where the object store is created.

Pools

The pools allow all of the settings defined in the Pool CRD spec. For more details, see the Pool CRD settings. In the example above, there must be at least three hosts (size 3) and at least three devices (2 data + 1 coding chunks) in the cluster.

When the zone section is set pools with the object stores name will not be created since the object-store will the using the pools created by the ceph-object-zone.

metadataPool: The settings used to create all of the object store metadata pools. Must use replication.
dataPool: The settings to create the object store data pool. Can use replication or erasure coding.
preservePoolsOnDelete: If it is set to ‘true’ the pools used to support the object store will remain when the object store will be deleted. This is a security measure to avoid accidental loss of data. It is set to ‘false’ by default. If not specified is also deemed as ‘false’.

Gateway Settings

The gateway settings correspond to the RGW daemon settings.

type: S3 is supported
sslCertificateRef: If specified, this is the name of the Kubernetes secret(opaque or tls type) that contains the TLS certificate to be used for secure connections to the object store. If it is an opaque Kubernetes Secret, Rook will look in the secret provided at the cert key name. The value of the cert key must be in the format expected by the RGW service: “The server key, server certificate, and any other CA or intermediate certificates be supplied in one file. Each of these items must be in PEM form.” They are scenarios where the certificate DNS is set for a particular domain that does not include the local Kubernetes DNS, namely the object store DNS service endpoint. If adding the service DNS name to the certificate is not empty another key can be specified in the secret’s data: insecureSkipVerify: true to skip the certificate verification. It is not recommended to enable this option since TLS is susceptible to machine-in-the-middle attacks unless custom verification is used.
caBundleRef: If specified, this is the name of the Kubernetes secret (type opaque) that contains additional custom ca-bundle to use. The secret must be in the same namespace as the Rook cluster. Rook will look in the secret provided at the cabundle key name.
port: The port on which the Object service will be reachable. If host networking is enabled, the RGW daemons will also listen on that port. If running on SDN, the RGW daemon listening port will be 8080 internally.
securePort: The secure port on which RGW pods will be listening. A TLS certificate must be specified either via sslCerticateRef or service.annotations
instances: The number of pods that will be started to load balance this object store.
externalRgwEndpoints: A list of IP addresses to connect to external existing Rados Gateways (works with external mode). This setting will be ignored if the CephCluster does not have external spec enabled. Refer to the external cluster section for more details.
annotations: Key value pair list of annotations to add.
labels: Key value pair list of labels to add.
placement: The Kubernetes placement settings to determine where the RGW pods should be started in the cluster.
resources: Set resource requests/limits for the Gateway Pod(s), see Resource Requirements/Limits.
priorityClassName: Set priority class name for the Gateway Pod(s)
service: The annotations to set on to the Kubernetes Service of RGW. The service serving cert feature supported in Openshift is enabled by the following example:
```
gateway:
service:
  annotations:
    service.beta.openshift.io/serving-cert-secret-name: <name of TLS secret for automatic generation>
```

Example of external rgw endpoints to connect to:

gateway:
  port: 80
  externalRgwEndpoints:
    - ip: 192.168.39.182

This will create a service with the endpoint 192.168.39.182 on port 80, pointing to the Ceph object external gateway. All the other settings from the gateway section will be ignored, except for securePort.

Zone Settings

The zone settings allow the object store to join custom created ceph-object-zone.

name: the name of the ceph-object-zone the object store will be in.

Runtime settings

MIME types

Rook provides a default mime.types file for each Ceph object store. This file is stored in a Kubernetes ConfigMap with the name rook-ceph-rgw-<STORE-NAME>-mime-types. For most users, the default file should suffice, however, the option is available to users to edit the mime.types file in the ConfigMap as they desire. Users may have their own special file types, and particularly security conscious users may wish to pare down the file to reduce the possibility of a file type execution attack.

Rook will not overwrite an existing mime.types ConfigMap so that user modifications will not be destroyed. If the object store is destroyed and recreated, the ConfigMap will also be destroyed and created anew.

Health settings

Rook-Ceph will be default monitor the state of the object store endpoints. The following CRD settings are available:

healthCheck: main object store health monitoring section

Here is a complete example:

healthCheck:
  bucket:
    disabled: false
    interval: 60s

The endpoint health check procedure is the following:

Create an S3 user
Create a bucket with that user
PUT the file in the object store
GET the file from the object store
Verify object consistency
Update CR health status check

Rook-Ceph always keeps the bucket and the user for the health check, it just does a PUT and GET of an s3 object since creating a bucket is an expensive operation.

Security settings

Ceph RGW supports encryption via Key Management System (KMS) using HashiCorp Vault. Refer to the vault kms section for detailed explanation. If these settings are defined, then RGW establish a connection between Vault and whenever S3 client sends a request with Server Side Encryption, it encrypts that using the key specified by the client. For more details w.r.t RGW, please refer Ceph Vault documentation

The security section contains settings related to KMS encryption of the RGW.

security:
  kms:
    connectionDetails:
      KMS_PROVIDER: vault
      VAULT_ADDR: http://vault.default.svc.cluster.local:8200
      VAULT_BACKEND_PATH: rgw
      VAULT_SECRET_ENGINE: kv
      VAULT_BACKEND: v2
    # name of the k8s secret containing the kms authentication token
    tokenSecretName: rgw-vault-token

For RGW, please note the following:

VAULT_SECRET_ENGINE option is specifically for RGW to mention about the secret engine which can be used, currently supports two: kv and transit. And for kv engine only version 2 is supported.
The Storage administrator needs to create a secret in the Vault server so that S3 clients use that key for encryption $ vault kv put rook/ key=$(openssl rand -base64 32) # kv engine $ vault write -f transit/keys/ exportable=true # transit engine
TLS authentication with custom certificates between Vault and CephObjectStore RGWs are supported from ceph v16.2.6 onwards

Deleting a CephObjectStore

During deletion of a CephObjectStore resource, Rook protects against accidental or premature destruction of user data by blocking deletion if there are any object buckets in the object store being deleted. Buckets may have been created by users or by ObjectBucketClaims.

For deletion to be successful, all buckets in the object store must be removed. This may require manual deletion or removal of all ObjectBucketClaims. Alternately, the cephobjectstore.ceph.rook.io finalizer on the CephObjectStore can be removed to remove the Kubernetes Custom Resource, but the Ceph pools which store the data will not be removed in this case.

Rook will warn about which buckets are blocking deletion in three ways:

An event will be registered on the CephObjectStore resource
A status condition will be added to the CephObjectStore resource
An error will be added to the Rook-Ceph Operator log