Ceph

Rook Ceph v0.9
Rook Ceph v1.8 Rook Ceph v1.7 Rook Ceph v1.6 Rook Ceph v1.5 Rook Ceph v1.4 Rook Ceph v1.3 Rook Ceph v1.2 Rook Ceph v1.1 Rook Ceph v1.0 Rook Ceph v0.9 Rook Ceph v0.8 Rook Ceph v0.7 Rook Ceph v0.6 Rook Ceph v0.5 Rook Ceph latest
    Edit on GitHub

    PLEASE NOTE: This document applies to v0.9 version and not to the latest stable release v1.8

    Documentation for other releases can be found by using the version selector in the top right of any doc page.

    Advanced Cluster Configuration

    These examples show how to perform advanced configuration tasks on your Rook storage cluster.

    Prerequisites

    Most of the examples make use of the ceph client command. A quick way to use the Ceph client suite is from a Rook Toolbox container.

    The Kubernetes based examples assume Rook OSD pods are in the rook-ceph namespace. If you run them in a different namespace, modify kubectl -n rook-ceph [...] to fit your situation.

    Use custom Ceph user and secret for mounting

    NOTE For extensive info about creating Ceph users, consult the Ceph documentation: http://docs.ceph.com/docs/mimic/rados/operations/user-management/#add-a-user. Using a custom Ceph user and secret can be done for filesystem and block storage.

    Create a custom user in Ceph with read-write access in the /bar directory on CephFS (For Ceph Mimic or newer, use data=POOL_NAME instead of pool=POOL_NAME):

    ceph auth get-or-create-key client.user1 mon 'allow r' osd 'allow rw tag cephfs pool=YOUR_FS_DATA_POOL' mds 'allow r, allow rw path=/bar'

    The command will return a Ceph secret key, this key should be added as a secret in Kubernetes like this:

    kubectl create secret generic ceph-user1-secret --from-literal=key=YOUR_CEPH_KEY

    NOTE This secret with the same name must be created in each namespace where the StorageClass will be used. In addition to this Secret you must create a RoleBinding to allow the Rook Ceph agent to get the secret from each namespace. The RoleBinding is optional if you are using a ClusterRoleBinding for the Rook Ceph agent secret access. A ClusterRole which contains the permissions which are needed and used for the Bindings are shown as an example after the next step.

    On a StorageClass parameters and/or flexvolume Volume entry options set the following options:

    mountUser: user1
mountSecret: ceph-user1-secret

    If you want the Rook Ceph agent to require a mountUser and mountSecret to be set in StorageClasses using Rook, you must set the environment variable AGENT_MOUNT_SECURITY_MODE to Restricted on the Rook Ceph operator Deployment.

    For more information on using the Ceph feature to limit access to CephFS paths, see Ceph Documentation - Path Restriction.

    ClusterRole

    NOTE: When you are using the Helm chart to install the Rook Ceph operator and have set mountSecurityMode to e.g., Restricted, then the below ClusterRole has already been created for you.

    This ClusterRole is needed no matter if you want to use a RoleBinding per namespace or a ClusterRoleBinding.

    apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRole
metadata:
  name: rook-ceph-agent-mount
  labels:
    operator: rook
    storage-backend: ceph
rules:
- apiGroups:
  - ""
  resources:
  - secrets
  verbs:
  - get

    RoleBinding

    NOTE: You either need a RoleBinding in each namespace in which a mount secret resides in or create a ClusterRoleBinding with which the Rook Ceph agent has access to Kubernetes secrets in all namespaces.

    Create the RoleBinding shown here in each namespace the Rook Ceph agent should read secrets for mounting. The RoleBinding subjects’ namespace must be the one the Rook Ceph agent runs in (default rook-ceph-system).

    Replace namespace: name-of-namespace-with-mountsecret according to the name of all namespaces a mountSecret can be in.

    kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: rook-ceph-agent-mount
  namespace: name-of-namespace-with-mountsecret
  labels:
    operator: rook
    storage-backend: ceph
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: rook-ceph-agent-mount
subjects:
- kind: ServiceAccount
  name: rook-ceph-system
  namespace: rook-ceph-system

    ClusterRoleBinding

    This ClusterRoleBinding only needs to be created once, as it covers the whole cluster.

    kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: rook-ceph-agent-mount
  labels:
    operator: rook
    storage-backend: ceph
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: rook-ceph-agent-mount
subjects:
- kind: ServiceAccount
  name: rook-ceph-system
  namespace: rook-ceph-system

    Log Collection

    All Rook logs can be collected in a Kubernetes environment with the following command:

    (for p in $(kubectl -n rook-ceph get pods -o jsonpath='{.items[*].metadata.name}')
do
    for c in $(kubectl -n rook-ceph get pod ${p} -o jsonpath='{.spec.containers[*].name}')
    do
        echo "BEGIN logs from pod: ${p} ${c}"
        kubectl -n rook-ceph logs -c ${c} ${p}
        echo "END logs from pod: ${p} ${c}"
    done
done
for i in $(kubectl -n rook-ceph-system get pods -o jsonpath='{.items[*].metadata.name}')
do
    echo "BEGIN logs from pod: ${i}"
    kubectl -n rook-ceph-system logs ${i}
    echo "END logs from pod: ${i}"
done) | gzip > /tmp/rook-logs.gz

    This gets the logs for every container in every Rook pod and then compresses them into a .gz archive for easy sharing. Note that instead of gzip, you could instead pipe to less or to a single text file.

    OSD Information

    Keeping track of OSDs and their underlying storage devices/directories can be difficult. The following scripts will clear things up quickly.

    Kubernetes

    # Get OSD Pods
# This uses the example/default cluster name "rook"
OSD_PODS=$(kubectl get pods --all-namespaces -l \
  app=rook-ceph-osd,rook_cluster=rook-ceph -o jsonpath='{.items[*].metadata.name}')

# Find node and drive associations from OSD pods
for pod in $(echo ${OSD_PODS})
do
 echo "Pod:  ${pod}"
 echo "Node: $(kubectl -n rook-ceph get pod ${pod} -o jsonpath='{.spec.nodeName}')"
 kubectl -n rook-ceph exec ${pod} -- sh -c '\
  for i in /var/lib/rook/osd*; do
    [ -f ${i}/ready ] || continue
    echo -ne "-$(basename ${i}) "
    echo $(lsblk -n -o NAME,SIZE ${i}/block 2> /dev/null || \
    findmnt -n -v -o SOURCE,SIZE -T ${i}) $(cat ${i}/type)
  done|sort -V
  echo'
done

    The output should look something like this. Note that OSDs on the same node will show duplicate information.

    Pod:  osd-m2fz2
Node: node1.zbrbdl
-osd0  sda3  557.3G  bluestore
-osd1  sdf3  110.2G  bluestore
-osd2  sdd3  277.8G  bluestore
-osd3  sdb3  557.3G  bluestore
-osd4  sde3  464.2G  bluestore
-osd5  sdc3  557.3G  bluestore

Pod:  osd-nxxnq
Node: node3.zbrbdl
-osd6   sda3  110.7G  bluestore
-osd17  sdd3  1.8T    bluestore
-osd18  sdb3  231.8G  bluestore
-osd19  sdc3  231.8G  bluestore

Pod:  osd-tww1h
Node: node2.zbrbdl
-osd7   sdc3  464.2G  bluestore
-osd8   sdj3  557.3G  bluestore
-osd9   sdf3  66.7G   bluestore
-osd10  sdd3  464.2G  bluestore
-osd11  sdb3  147.4G  bluestore
-osd12  sdi3  557.3G  bluestore
-osd13  sdk3  557.3G  bluestore
-osd14  sde3  66.7G   bluestore
-osd15  sda3  110.2G  bluestore
-osd16  sdh3  135.1G  bluestore

    Separate Storage Groups

    By default Rook/Ceph puts all storage under one replication rule in the CRUSH Map which provides the maximum amount of storage capacity for a cluster. If you would like to use different storage endpoints for different purposes, you’ll have to create separate storage groups.

    In the following example we will separate SSD drives from spindle-based drives, a common practice for those looking to target certain workloads onto faster (database) or slower (file archive) storage.

    CRUSH Hierarchy

    To see the CRUSH hierarchy of all your hosts and OSDs run:

    ceph osd tree

    Before we separate our disks into groups, our example cluster looks like this:

    ID WEIGHT  TYPE NAME          UP/DOWN REWEIGHT PRIMARY-AFFINITY
-1 7.21828 root default
-2 0.94529     host node1
 0 0.55730         osd.0           up  1.00000          1.00000
 1 0.11020         osd.1           up  1.00000          1.00000
 2 0.27779         osd.2           up  1.00000          1.00000
-3 1.22480     host node2
 3 0.55730         osd.3           up  1.00000          1.00000
 4 0.11020         osd.4           up  1.00000          1.00000
 5 0.55730         osd.5           up  1.00000          1.00000
-4 1.22480     host node3
 6 0.55730         osd.6           up  1.00000          1.00000
 7 0.11020         osd.7           up  1.00000          1.00000
 8 0.06670         osd.8           up  1.00000          1.00000

    We have one root bucket default that every host and OSD is under, so all of these storage locations get pooled together for reads/writes/replication.

    Let’s say that osd.1, osd.3, and osd.7 are our small SSD drives that we want to use separately.

    First we will create a new root bucket called ssd in our CRUSH map. Under this new bucket we will add new host buckets for each node that contains an SSD drive so data can be replicated and used separately from the default HDD group.

    # Create a new tree in the CRUSH Map for SSD hosts and OSDs
ceph osd crush add-bucket ssd root
ceph osd crush add-bucket node1-ssd host
ceph osd crush add-bucket node2-ssd host
ceph osd crush add-bucket node3-ssd host
ceph osd crush move node1-ssd root=ssd
ceph osd crush move node2-ssd root=ssd
ceph osd crush move node3-ssd root=ssd

# Create a new rule for replication using the new tree
ceph osd crush rule create-simple ssd ssd host firstn

    Secondly we will move the SSD OSDs into the new ssd tree, under their respective host buckets:

    ceph osd crush set osd.1 .1102 root=ssd host=node1-ssd
ceph osd crush set osd.3 .1102 root=ssd host=node2-ssd
ceph osd crush set osd.7 .1102 root=ssd host=node3-ssd

    It’s important to note that the ceph osd crush set command requires a weight to be specified (our example uses .1102). If you’d like to change their weight you can do that here, otherwise be sure to specify their original weight seen in the ceph osd tree output.

    So let’s look at our CRUSH tree again with these changes:

    ID WEIGHT  TYPE NAME          UP/DOWN REWEIGHT PRIMARY-AFFINITY
-8 0.22040 root ssd
-5 0.11020     host node1-ssd
 1 0.11020         osd.1           up  1.00000          1.00000
-6 0.11020     host node2-ssd
 4 0.11020         osd.4           up  1.00000          1.00000
-7 0.11020     host node3-ssd
 7 0.11020         osd.7           up  1.00000          1.00000
-1 7.21828 root default
-2 0.83509     host node1
 0 0.55730         osd.0           up  1.00000          1.00000
 2 0.27779         osd.2           up  1.00000          1.00000
-3 1.11460     host node2
 3 0.55730         osd.3           up  1.00000          1.00000
 5 0.55730         osd.5           up  1.00000          1.00000
-4 1.11460     host node3
 6 0.55730         osd.6           up  1.00000          1.00000
 8 0.55730         osd.8           up  1.00000          1.00000

    Using Disk Groups With Pools

    Now we have a separate storage group for our SSDs, but we can’t use that storage until we associate a pool with it. The default group already has a pool called rbd in many cases. If you created a pool via CustomResourceDefinition, it will use the default storage group as well.

    Here’s how to create new pools:

    # SSD backed pool with 128 (total) PGs
ceph osd pool create ssd 128 128 replicated ssd

    Now all you need to do is create RBD images or Kubernetes StorageClasses that specify the ssd pool to put it to use.

    Configuring Pools

    Placement Group Sizing

    The general rules for deciding how many PGs your pool(s) should contain is:

    • Less than 5 OSDs set pg_num to 128
    • Between 5 and 10 OSDs set pg_num to 512
    • Between 10 and 50 OSDs set pg_num to 1024

    If you have more than 50 OSDs, you need to understand the tradeoffs and how to calculate the pg_num value by yourself. For calculating pg_num yourself please make use of the pgcalc tool

    If you’re already using a pool it is generally safe to increase its PG count on-the-fly. Decreasing the PG count is not recommended on a pool that is in use. The safest way to decrease the PG count is to back-up the data, delete the pool, and recreate it. With backups you can try a few potentially unsafe tricks for live pools, documented here.

    Deleting A Pool

    Be warned that this deletes all data from the pool, so Ceph by default makes it somewhat difficult to do.

    First you must inject arguments to the Mon daemons to tell them to allow the deletion of pools. In Rook Tools you can do this:

    ceph tell mon.\* injectargs '--mon-allow-pool-delete=true'

    Then to delete a pool, rbd in this example, run:

    ceph osd pool rm rbd rbd --yes-i-really-really-mean-it

    Creating A Pool

    # Create a pool called rbd with 1024 total PGs, using the default
# replication ruleset
ceph osd pool create rbd 1024 1024 replicated replicated_ruleset

    replicated_ruleset is the default CRUSH rule that replicates between the hosts and OSDs in the default root hierarchy.

    Setting The Number Of Replicas

    The size setting of a pool tells the cluster how many copies of the data should be kept for redundancy. By default the cluster will distribute these copies between host buckets in the CRUSH Map This can be set when creating a pool via CustomResourceDefinition or after creation with ceph.

    So for example let’s change the size of the rbd pool to three:

    ceph osd pool set rbd size 3

    Now if you run ceph -s you may see “recovery” operations and PGs in “undersized” and other “unclean” states. The cluster is essentially fixing itself since the number of replicas has been increased, and should go back to “active/clean” state shortly, after data has been replicated between hosts. When that’s done you will be able to lose two of your storage nodes and still have access to all your data in that pool, since the CRUSH algorithm will guarantee that at least one replica will still be available on another storage node. Of course you will only have 1/3 the capacity as a tradeoff.

    Setting PG Count

    Be sure to read the placement group sizing section before changing the number of PGs.

    # Set the number of PGs in the rbd pool to 512
ceph osd pool set rbd pg_num 512

    Custom ceph.conf Settings

    With Rook the full swath of Ceph settings are available to use on your storage cluster. When we supply Rook with a ceph.conf file those settings will be propagated to all Mon, OSD, MDS, and RGW daemons to use.

    In this example we will set the default pool size to two, and tell OSD daemons not to change the weight of OSDs on startup.

    WARNING: Modify Ceph settings carefully. You are leaving the sandbox tested by Rook. Changing the settings could result in unhealthy daemons or even data loss if used incorrectly.

    Kubernetes

    When the Rook Operator creates a cluster, a placeholder ConfigMap is created that will allow you to override Ceph configuration settings. When the daemon pods are started, the settings specified in this ConfigMap will be merged with the default settings generated by Rook.

    The default override settings are blank. Cutting out the extraneous properties, we would see the following defaults after creating a cluster:

    $ kubectl -n rook-ceph get ConfigMap rook-config-override -o yaml
kind: ConfigMap
apiVersion: v1
metadata:
  name: rook-config-override
  namespace: rook-ceph
data:
  config: ""

    To apply your desired configuration, you will need to update this ConfigMap. The next time the daemon pod(s) start, the settings will be merged with the default settings created by Rook.

    kubectl -n rook-ceph edit configmap rook-config-override

    Modify the settings and save. Each line you add should be indented from the config property as such:

    apiVersion: v1
kind: ConfigMap
metadata:
  name: rook-config-override
  namespace: rook-ceph
data:
  config: |
    [global]
    osd crush update on start = false
    osd pool default size = 2

    Each daemon will need to be restarted where you want the settings applied:

    • Mons: ensure all three mons are online and healthy before restarting each mon pod, one at a time
    • OSDs: restart your the pods by deleting them, one at a time, and running ceph -s between each restart to ensure the cluster goes back to “active/clean” state.
    • RGW: the pods are stateless and can be restarted as needed
    • MDS: the pods are stateless and can be restarted as needed

    After the pod restart, your new settings should be in effect. Note that if you create the ConfigMap in the rook namespace before the cluster is even created the daemons will pick up the settings at first launch.

    The only validation of the settings done by Rook is whether the settings can be merged using the ini file format with the default settings created by Rook. Beyond that, the validity of the settings is your responsibility.

    OSD CRUSH Settings

    A useful view of the CRUSH Map is generated with the following command:

    ceph osd tree

    In this section we will be tweaking some of the values seen in the output.

    OSD Weight

    The CRUSH weight controls the ratio of data that should be distributed to each OSD. This also means a higher or lower amount of disk I/O operations for an OSD with higher/lower weight, respectively.

    By default OSDs get a weight relative to their storage capacity, which maximizes overall cluster capacity by filling all drives at the same rate, even if drive sizes vary. This should work for most use-cases, but the following situations could warrant weight changes:

    • Your cluster has some relatively slow OSDs or nodes. Lowering their weight can reduce the impact of this bottleneck.
    • You’re using bluestore drives provisioned with Rook v0.3.1 or older. In this case you may notice OSD weights did not get set relative to their storage capacity. Changing the weight can fix this and maximize cluster capacity.

    This example sets the weight of osd.0 which is 600GiB

    ceph osd crush reweight osd.0 .600

    OSD Primary Affinity

    When pools are set with a size setting greater than one, data is replicated between nodes and OSDs. For every chunk of data a Primary OSD is selected to be used for reading that data to be sent to clients. You can control how likely it is for an OSD to become a Primary using the Primary Affinity setting. This is similar to the OSD weight setting, except it only affects reads on the storage device, not capacity or writes.

    In this example we will make sure osd.0 is only selected as Primary if all other OSDs holding replica data are unavailable:

    ceph osd primary-affinity osd.0 0

    OSD Dedicated Network

    It is possible to configure ceph to leverage a dedicated network for the OSDs to communicate across. A useful overview is the CEPH Networks section of the Ceph documentation. If you declare a cluster network, OSDs will route heartbeat, object replication and recovery traffic over the cluster network. This may improve performance compared to using a single network.

    Two changes are necessary to the configuration to enable this capability:

    Use hostNetwork in the rook ceph cluster configuration

    Enable the hostNetwork setting in the Ceph Cluster CRD configuration. For example,

      network:
    hostNetwork: true

    Define the subnets to use for public and private OSD networks

    Edit the rook-config-override configmap to define the custom network configuration:

    kubectl -n rook-ceph edit configmap rook-config-override

    In the editor, add a custom configuration to instruct ceph which subnet is the public network and which subnet is the private network. For example:

    apiVersion: v1
data:
  config: |
    [global]
    public network =  10.0.7.0/24
    cluster network = 10.0.10.0/24
    public addr = ""
    cluster addr = ""

    After applying the updated rook-config-override configmap, it will be necessary to restart the OSDs by deleting the OSD pods in order to apply the change. Restart the OSD pods by deleting them, one at a time, and running ceph -s between each restart to ensure the cluster goes back to “active/clean” state.

    Phantom OSD Removal

    If you have OSDs in which are not showing any disks, you can remove those “Phantom OSDs” by following the instructions below. To check for “Phantom OSDs”, you can run:

    ceph osd tree

    An example output looks like this:

    ID  CLASS WEIGHT  TYPE NAME STATUS REWEIGHT PRI-AFF
 -1       57.38062 root default
-13        7.17258     host node1.example.com
  2   hdd  3.61859         osd.2                up  1.00000 1.00000
 -7              0     host node2.example.com   down    0    1.00000

    The host node2.example.com in the output has no disks, so it is most likely a “Phantom OSD”.

    Now to remove it, use the ID in the first column of the output and replace <ID> with it. In the example output above the ID would be -7. The commands are:

    ceph osd out <ID>
ceph osd crush remove osd.<ID>
ceph auth del osd.<ID>
ceph osd rm <ID>

    To recheck that the Phantom OSD got removed, re-run the following command and check if the OSD with the ID doesn’t show up anymore:

    ceph osd tree